Air Blower Seal Repair Kit for Coleman Lay-Z-Spa, Hot Tub Water Leak Repair Replace Kit, Compatible with Lay-Z-Spa AirJet Hot Tubs Models

Sxkxm Blower Seal Repair kit，for Coleman SaluSpa inflatable hot tub blower Repair and replacementType: Blower Seal Repair replacement partColor: WhiteCompatible Brand: with Lay-Z-Spa AirJet models, including 54124, 54129, 54131, 54145, 54112, 54155, 54185, 54186, 54190, 54176, 54295, 54297, 90443, 90437, 90363, 13804 (not compatible with HydroJet or HydroForce models)Product use functionThe umbrella valve is pressed into the intake pipe on the inner lining of the spa, using the same silicone umbrella valve as the spa, but moved to the front of the pipeline for easy cleaning and service. There is no need to disassemble or replace the old umbrella valve at the back of the pipe. The new one is simply stacked at the top and provides the same functionality. It can be compatible with both older spa centers (shallow tubes) and newer spa centers (deep tubes).What you can receive 1 umbrella valve, 1 intake seal, 2 dome/mushroom seals, 2 large O-rings and 1 small O-ring (for old 2nd generation pumps)

• Water leak proof: A full set of silicone seals for repairing blower-related water leaks
• Compatible models: The full silicone sealing kit is compatible with Lay-Z-Spa AirJet models, including 54124, 54129, 54131, 54145, 54112, 54155, 54185, 54186, 54190, 54176, 54295, 54297, 90443, 90437, 90363, 13804 (not compatible with HydroJet or HydroForce models)
• Instructions for use：The umbrella valve is pressed into the intake pipe on the inner lining of the spa, using the same silicone umbrella valve as the spa, but moved to the front of the pipeline for easy cleaning and service. There is no need to disassemble or replace the old umbrella valve at the back of the pipe. The new one is simply stacked at the top and provides the same functionality. It can be compatible with both older spa centers (shallow tubes) and newer spa centers (deep tubes).
• What you can receive: 1 umbrella valve, 1 intake seal, 2 dome/mushroom seals, 2 large O-rings and 1 small O-ring (for old 2nd generation pumps)
• Important: The umbrella valve housing must prevent the ingress of water by connecting the top of the heater/pump unit inlet on top of it